Whatsapp Us Call Us



A Belt Filter Press is a sludge dewatering device that applies mechanical pressure to chemically conditioned slurry, which is sandwiched between two (2) tensioned belts, by passing those belts through a serpentine of decreasing diameter rolls. The machine can actually be divided into three (3) zones: gravity zone, where free draining water is drained by gravity through a porous belt; wedge zone, where the solids are prepared for pressure application; and pressure zone, where medium, then high pressure is applied to the conditioned solids.

Special Advantages:

  • High Dryness and solid capture rate belt filter press
  • Advanced slurry distribution unit
  • Reliable and stable in operation;
  • Longer service time;
  • Low energy consumption;
  • Wide range application;
  • Easy to operate and maintenance
  • Compact structure, small space to install;
  • Automatic operation, reducing labor cost and intensity.

Model Table

ModelBelt Width (mm)Electric LoadDimensionAir RequirementWash Water
BFP 66000.53.9x1.0x1.31m3/hr4m3/hr
BFP 1212001.03.9x1.6x1.31m3/hr6m3/hr
BFP 1515001.53.9x1.9x1.31m3/hr9m3/hr
BFP 1818001.53.9x2.2x1.31m3/hr10m3/hr
BFP 2222001.53.9x2.6x1.31m3/hr12m3/hr
BFP 2626002.03.9x3.0x1.31m3/hr14m3/hr